• page_banner

Bis(N,N’,N”-trimethyl-1,4,7-triazacyclononane)-trioxo-dimanganese(IV)di(hexafluorophosphate)monohydrate; MnTACN

Short Description:

Chemical name:Bis(N,N’,N”-trimethyl-1,4,7-triazacyclononane)-trioxo-dimanganese(IV)di(hexafluorophosphate)monohydrate; MnTACN

CAS:116633-52-4

Trade name: Bleaching catalyst

Chemical formula:C18H44F12Mn2N6O4P2

Molecular weight:807.82

Melting point: 198-201℃

 


Product Detail

Product Tags

Product Description

Commercial Code

MnTACNMancat-1033;Mn-Triazonine-Complex

Appearance

Free-flowing orange-red crystals

Active Content

>98 %

Applications

• Automatic dishwashing---removes tea, coffee and fruit stain at all temperature

• Degradation of dyes from waste water processes

• Supports amylases in starch degradation process

•Fast paint drying catalyst that possible to replace CoII(2-EH)2.

•Good drying performances obtained and better than CoII(2-EH)2..

•Radical-based alkyd resin curing

Main Characteristics

MnTACN was shown to exhibit drying activity in short oil and long oil solvent borne (SB) alkyd paint formulations, as well as in water-borne alkyd-emulsion paints (short and long oil alkyd resins refer to the type of oil used in the resin). In the short oil SB paint, the MnTACN catalyst showed a similar drying activity as CoII(2-EH)2. (the latter mixed with the secondary driers Ca(2-EH)2 and Sr(2-EH)2) and significantly better activity than when using MnII(2-EH)2.

Packing:

Supplied as a >98% solid in a 25kg pack

Storage

It is advised to store in neutral or slightly alkaline detergent environment. Under these conditions product has a shelf life of ≥ 6 months

Typical properties

Melting point

198-201℃

Form

erythrinus

Oder

oderless

PH

A 10% suspension has a PH of 6-8

Safety

When handling this product, please comply with the advice and information given in the safety data sheet and observe protective and workplace hygiene measures adequate for handling chemicals.

 

Note

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and  application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain proper- ties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. The agreed contractual quality of the product results exclusively from the statements made in the product specification. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed.


  • Previous:
  • Next: